An attached net, also known as a helicoil, is an essential device for professionals. It is used to repair or reinforce damaged or worn threads in materials such as metal or plastic. It acts directly on the solidity of the tapping and of your assembly by compressing perfectly when it is installed in the receiving threads of the tapped part.
An added thread makes it possible to create stronger threads in new materials. This tool is very useful in the field of mechanics, the automotive industry, aeronautics and many other fields requiring the assembly of mechanical parts.
The helicoil thread is a precious device available in 304 stainless steel, this threaded insert in the form of a spring is inserted into a previously tapped hole, thus forming an internal thread.
With its outer diameter larger than that of the original hole, it effectively reinforces the thread. Once in place, the added thread offers a new and wear-resistant thread, capable of accommodating a bolt or a screw.
They are most often used in materials with low shear strength, such as aluminum or aluminum and magnesium alloys.
In addition, the helicoil net allows you to:
The helicoil thread can be available in several threads (metric, UNC, UNF, BSF) that you can find in the form of various kits.
In the Gardette Industries catalog, you can immediately find a selection of standard thread inserts And Fine thread count.
Why use an attached net?
All our added nets are available in
Setting up a net is both simple and economical, because you just need to follow a few basic rules. For a controlled installation, whether in small, medium or large series, we provide you with a wide range of manual and automatic tools for installing your nets.
Step one: drilling the pilot hole
For drilling, feel free to use a high quality standard twist drill. Before starting, remember to chamfer at 90° and deburring the surface carefully for optimal preparation.
Second step: tapping
To create the thread thread thread, we recommend using specific taps that will be adapted to the system and the thread.
Thanks to our push-back tapping system, you can get a perfectly clean thread, without any chips.
Last step: the installation of the net
You can perform the pose using a manual installation tool, or an automatic installation tool.
To remove your nets, we have a dedicated tool Filet extraction system reported.
An attached net, also known as a helicoil, is an essential device for professionals. It is used to repair or reinforce damaged or worn threads in materials such as metal or plastic. It acts directly on the solidity of the tapping and of your assembly by compressing perfectly when it is installed in the receiving threads of the tapped part.
An added thread makes it possible to create stronger threads in new materials. This tool is very useful in the field of mechanics, the automotive industry, aeronautics and many other fields requiring the assembly of mechanical parts.
The helicoil thread is a precious device available in 304 stainless steel, this threaded insert in the form of a spring is inserted into a previously tapped hole, thus forming an internal thread.
With its outer diameter larger than that of the original hole, it effectively reinforces the thread. Once in place, the added thread offers a new and wear-resistant thread, capable of accommodating a bolt or a screw.
They are most often used in materials with low shear strength, such as aluminum or aluminum and magnesium alloys.
In addition, the helicoil net allows you to:
The helicoil thread can be available in several threads (metric, UNC, UNF, BSF) that you can find in the form of various kits.
In the Gardette Industries catalog, you can immediately find a selection of standard thread inserts And Fine thread count.
Why use an attached net?
All our added nets are available in
Setting up a net is both simple and economical, because you just need to follow a few basic rules. For a controlled installation, whether in small, medium or large series, we provide you with a wide range of manual and automatic tools for installing your nets.
Step one: drilling the pilot hole
For drilling, feel free to use a high quality standard twist drill. Before starting, remember to chamfer at 90° and deburring the surface carefully for optimal preparation.
Second step: tapping
To create the thread thread thread, we recommend using specific taps that will be adapted to the system and the thread.
Thanks to our push-back tapping system, you can get a perfectly clean thread, without any chips.
Last step: the installation of the net
You can perform the pose using a manual installation tool, or an automatic installation tool.
To remove your nets, we have a dedicated tool Filet extraction system reported.
Our sales department is available from Monday to Thursday from 8:30 to 12:00 and from 13:30 to 17:00 and on Friday from 8:30 to 12:00 and from 13:30 to 16:30.
In all our offers and acknowledgements of receipt (AR), we explicitly mention departure times.
We are certified according to ITAF 16 949 and ISO 9001 standards
We specialize in the manufacture of a wide range of keys and special parts. Our expertise extends to all fixing and assembly elements.
The company has 60 professionals divided into various categories, including technicians, engineers, support functions, sales representatives and management members.
